Protect Yourself from Direct Sun Exposure with Window Tinting
Without a doubt all of us is familiar with window tinting, we have seen it everyday in our car and residential windows as well in commercial buildings. Window films that are used for home window tinting are usually different from films used in cars window tinting since there is a law regulating the VLT of the car tints; and this law depends on the law of each State.
Window tint or the so called solar control window films are very thin film that are regularly made of polyester base and has a scratch – resistant coating. These films are just millimeters thin and affixed to the interior side of the window with a special kind of adhesive.
Basically the types of Window Films are the Dyed Films, Deposited Films, Sputtered/ Metalized Films, and the Hybrid Films.
The Dyed type of Window Film is a film that absorbed the harmful heat and UVR from the sun so that it will not penetrate inside the house. Although many have used this way of window tinting, you should know that because of the heat absorption by there is a big risk of glass breakage due to the increased stress on the glass. So it is needed to check the specifications and restrictions of the different window film in order to for you to be sure that the film or tint that is being installed in your window is the best and most appropriate window film for your house window tinting or car window tinting.
The other type of Window Film is the metallized film. This film is embedded with different kind of metals. This works by reflecting most of the sun rays in order to prevent it from penetrating inside the house.
You should take note that not all films are appropriate for all glass. You must think about the absorption capacity of the glass and the film, the thickness of the glass, the size of the pane as well as the construction of the window whether it is single pane, insulated glass, treated or coated, laminated or toughened.
An advice on the suitable variety of film for the glass is imperative to make sure that the glass does not break as a result of thermal pressure. However, it is not impossible that the glass may break even if the suitable film is installed, because the pane has been damaged during the glazing of the window, or as a result of movement of the building or other physical stresses that are not apparent at the time of the application of the film.
Glass may crack subsequent to the application of sign writing or if heavy, thermally efficient drapes are hung close to the glass, particularly if the edges of the glass are damaged.
Article Source: this factual content has not been modified from the source. This content is syndicated news that can be used for your research, and we hope that it can help your productivity. This content is strictly for educational purposes and is not made for any kind of commercial purposes of this blog.